Wednesday, April 17, 2024
TRADE ALLEY

LS CLASSIC DISTRIBUTORS AND PLUG WIRES AT SUMMIT

LS Classic Series distributor and plug wire sets are the perfect way to top-off your vintage appearing LS swap. The LS Classic Series starts with a set of high-quality 7mm Kevlar® spiral core spark plug wires with high-temp silicone pre-installed 90 degree coil boots and straight unterminated spark plug boots. The wires are 9 ft. long with 40 ohms of resistance per ft., giving you all the length and performance, you need to remote mount your coils—so they’re out of sight and out of mind. The plug wires first connect to the coils and then pass into the hollow cast-aluminium distributor body that is bolted to the engine’s valley plate. The wires continue on to the spark plugs through the distributor for an authentic nostalgic look. Top-off your vintage appearing LS swap perfectly with one of these distributor and plug wire sets by LS Classic.

Note: These distributors are designed to bolt to the back two bolts of LS Classic valley pans and will not clear valley plates with raised ribs or oil pressure sender bosses.

It's only fair to share…